chemical reaction and equation class 10

ncert science book class 10 solutions

chemical reaction and equation class 10 pdf

NCERT Class 10 Science Chapter 1
Chemical Reactions and Equations

1. Why should a magnesium ribbon be cleaned before burning in the air?

The magnesium ribbon should be cleaned before burning in the air because Magnesium metal reacts with the atmospheric oxygen and forms Magnesium Oxide (MgO) layer which is a very stable compound. To prevent further reactions with Oxygen, it is, therefore, necessary to clean the ribbon by removing the layer of MgO. Ans: The magnesium ribbon should be cleaned before burning in air because Magnesium metal reacts with the atmospheric oxygen and forms Magnesium Oxide (MgO) layer which is a very stable compound. In order to prevent further reactions with Oxygen, it is, therefore, necessary to clean the ribbon by removing the layer of MgO.

2. Write a balanced equation for the following chemical reactions.

i) Hydrogen + Chloride —-> Hydrogen chloride

Ans: H2 + Cl2 → 2HCl

ii) Barium chloride + Aluminium sulphate —-> Barium sulphate + Aluminium chloride

Ans: 3BaCl2 + Al2(SO4)3 →3BaSO4 + 2AlCl3

iii) Sodium + Water —-> Sodium hydroxide + Hydrogen

Ans: 2Na + 2H2O → 2NaOH + H2

3. Write a balanced chemical equation with state symbols for the following reactions

i) Solutions of Barium chloride and Sodium sulphate in water react to give insoluble Barium sulphate and solution of Sodium chloride.

Ans: BaCl2 + Na2SO4 → BaSO4 + 2NaCl

ii) Sodium hydroxide solution in water reacts with the hydrochloric acid solution to produce Sodium chloride solution and water.

Ans: NaOH + HCl → NaCl + H2O

1. A solution of a substance, ‘X,’ is used for whitewashing.

(i) Name the substance ‘X’ and write its formula.

Ans: The substance ‘X’ which is used in whitewashing is quick lime or Calcium Oxide and its formula is CaO.

(ii) Write the reaction of the substance ‘X’ named in (i) above with water.

Ans: CaO + H2O → Ca(OH)2

2. Why is the amount of gas collected in one of the test tubes in Activity 1.7 double the amount collected in the other? Name this gas.

Ans: In activity 1.7, gas collected in one test tube is double the amount collected in the other because water gets hydrolysed to release H2 and O2 gas. Here, after electrolysis two molecules of Hydrogen and one molecule of oxygen gas are released; hence, the amount of Hydrogen collected would be double that of oxygen.

1. Why does the colour of copper sulphate solution change when an iron nail is dipped in it?

Ans: When an iron nail is dipped in the copper sulphate solution, iron displaces copper from the copper sulphate because iron is more reactive than copper. Therefore, the colour of the copper sulphate solution changes. The reaction is

Fe + CuSO4 → FeSO4 + Cu

2. Give an example of a double displacement reaction other than the one given in Activity 1.10.

Ans: The reaction Between silver nitrate (AgNO3) and Sodium chloride (NaCl) is an example of a double displacement reaction. During the reaction, negative and positive ions trade positions as a result of the formation of white silver chloride precipitate. The chemical reaction is given below.

Ag+ + NO3– + Na+ + Cl– → AgCl + Na+ + NO3–

3. Identify the substances that are oxidised and that are reduced in the following equation.

i) 4Na(s) + O2(g) → 2Na2O(s)

ii) CuO(s) + H2(g) → Cu(s) + H2O(l)

Ans: The Sodium (Na) in the first equation is getting oxidized with the addition of Oxygen (O2), and the Copper (Cu) in the second equation is reduced due to the addition of Hydrogen (H2).

1. Which of the statements about the reaction below are incorrect?

2PbO(s) + C(s) → 2Pb(s) + CO2(g)

(a) Lead is getting reduced

(b) Carbon Dioxide is getting oxidised

(d) Lead oxide is getting reduced

(i) (a) and (b)

(ii) (a) and (c)

(iii) (a), (b) and (c)

(iv) all the above

Ans: (i) (a) and (b)

Explanation: (a) Because Oxygen is being removed and (b) Because the removed oxygen from Lead is added to the elemental Carbon.

2. Fe2O3 + 2Al → Al2O3 + 2Fe

The above reaction is an example of a

a.Combination reaction

b.Double displacement reaction

c.Decomposition reaction

d.Displacement reaction

Ans: d. Displacement reaction.

Explanation: The Oxygen from the Ferrous oxide is getting displaced to the Aluminium metal to form Aluminium Oxide. In this reaction, Aluminum is a more reactive metal than Fe. Therefore, Al will displace Fe from its oxide. This type of chemical reaction, called displacement reaction, is in which one of the elements displaces another. Here, less reactive metal is displaced by more reactive metal. Since one-time displacement is occurring, it is called a single displacement reaction.

3. What happens when dilute hydrochloric acid is added to iron fillings? Tick the correct answer.

a. Hydrogen gas and Iron chloride are produced.

b. Chlorine gas and Iron hydroxide are produced.

c. No reaction takes place.

d. Iron salt and water are produced.

Ans: Hydrogen gas and Iron chloride are produced.

Explanation: The Chlorine from Hydrogen chloride is displaced by the Iron fillings to undergo the following reaction.

2HCl + Fe → FeCl2 + H2

4. What is a balanced chemical equation? Why should a chemical equation be balanced?

Ans: A balanced equation is one in which a number of different atoms on both the reactant and product sides are equal. Balancing chemical equations is necessary for the reaction should obey The Law of Conservation of mass. Balancing the chemical equation has no defined method and is purely a trial-and-error attempt.

5. Translate the following statements into chemical equations and balance them.

(a) Hydrogen gas combines with nitrogen to form ammonia.

Ans: (a)

Unbalanced: H2 + N2 → NH3

Balanced: 3H2 + N2 → 2NH3

(b) Hydrogen sulphide gas burns in the air to give water and sulphur dioxide.

Ans: (b)

Unbalanced: H2S + O2 → H2O + SO2

Balanced: 2H2S + 3O2 → 2H2O + 2SO2

Ans: (c)

Unbalanced:BaCl2 + Al2(SO4)3 → AlCl3 + BaSO4

Balanced: 3BaCl2 + Al2(SO4)3 → 2AlCl3 + 3BaSO4

(d) Potassium metal reacts with water to give potassium hydroxide and Hydrogen gas.

Ans :(d)

Unbalanced: K + H2O → KOH + H2

Balanced: 2K + 2H2O → 2KOH + H2

6. Balance the following chemical equations.

(a) HNO3 + Ca(OH)2 → Ca(NO3)2 + H2O

Ans: (a) 2HNO3 + Ca(OH)2 → Ca(NO3)2 + 2H2O

(b) NaOH + H2SO4 → Na2SO4 + H2O

Ans: (b) 2NaOH + H2SO4 → Na2SO4 + 2H2O

Ans: (c) NaCl + AgNO3 → AgCl + NaNO3

(d) BaCl2 + H2SO4 → BaSO4 + HCl

Ans: (d) BaCl2 + H2SO4 → BaSO4 + 2HCl

7. Write the balanced chemical equation for the following reactions.

Calcium hydroxide + Carbon dioxide —-> Calcium carbonate + Water

Ans: 2Ca(OH)2 + 2CO2 → 2CaCO3 + 2H2O

Zinc + Silver nitrate —-> Zinc nitrate + Silver

Ans: Zn + 2AgNO3 → Zn(NO3)2 + 2Ag

Aluminium + Copper chloride —-> Aluminium chloride + Copper

Ans: 2Al + 3CuCl2 → 2AlCl3 + 3Cu

Barium chloride + Potassium sulphate —-> Barium sulphate + Potassium chloride

Ans: BaCl2 + K2SO4 → BaSO4 + 2KCl

8. Write a balanced chemical equation for the following and identify the type of reaction of each case.

KBr + BaI2 → KI + BaBr2

Ans: 2KBr + BaI2 → 2KI + BaBr2

(Double Displacement Reaction)

ZnCO3 → ZnO + CO2

Ans: ZnCO3 → ZnO + CO2

(Decomposition Reaction)

H2 + Cl → HCl

Ans: H2 + Cl → 2HCl

(Combination Reaction)

Mg + HCl → MgCl2 + H2

Ans: Mg + 2HCl → MgCl2 + H2

(Displacement Reaction)

9. What is meant by exothermic and endothermic reactions? Give examples.

Ans: An endothermic reaction occurs when energy is absorbed from the surroundings in the form of heat (For example, Photosynthesis, melting of ice, evaporation). Conversely, an exothermic reaction is one in which energy is released from the system into the surroundings (Examples: Explosions, concrete settings, nuclear fission and fusion).

10. Why is respiration considered to be an exothermic reaction?

Ans: For the survival of life, we require energy. We obtain this energy from the food we eat. The food molecules, through the process of digestion, is broken down into simpler molecule like glucose. These substances come in contact with the Oxygen present in our body cells to form Carbon dioxide and water along with a certain amount of energy (Respiration process). Since the energy is in the form of heat (that maintains our body temperature), respiration is considered to be an exothermic reaction. The reaction taking place is:

C6H12O6 + 6O2 → 6CO2 + 6H2O + Energy

11. Why are decomposition reactions called the opposite of Combination reactions? Write equations for decomposition reactions.

Ans: Combination reaction is said to be the reaction between two or more molecules to form a larger molecule; whereas the decomposition reaction is defined as the splitting of larger molecules into two or more smaller molecules. This essentially explains that the decomposition reaction is the opposite of the combination reaction.

In most cases, the decomposition reaction is endothermic since the heat from the surrounding or induced heat is used to break the bonds of the larger molecule. A few examples of decomposition reactions are

ZnCO3 → ZnO + CO2

CaCO3 + Energy → CaO + CO2

2HgO → 2Hg + O2

12. Write one equation each for decomposition reactions in which energy is supplied in the form of heat, light or electricity.

Ans: (a) Thermal decomposition reaction (Thermolysis)

Decomposition of potassium chlorate: When heated strongly, potassium chlorate decomposes into potassium chloride and oxygen. This reaction is used for the preparation of oxygen.

2KClO3 + Heat → 2KCl + 3O2

(b) Electrolytic decomposition reaction (Electrolysis)

Decomposition of sodium chloride: On passing electricity through molten sodium chloride, it decomposes into sodium and chlorine.

Decomposition of hydrogen peroxide: In the presence of light, hydrogen peroxide decomposes into water and oxygen.

13. What is the difference between displacement and double displacement reactions? Write relevant equations for the above.

Ans: A displacement reaction is one when a more reactive substance displaces a less reactive one from its salt solution, whereas a double displacement reaction is one where a mutual exchange of ions happens between two compounds.

In a displacement reaction, only a single displacement takes place, whereas in the double displacement reaction, as the name suggests, two displacement takes place between the molecules.

Example:

Displacement reaction

Mg + 2HCl → MgCl2 + H2

Double displacement reaction

2KBr + BaI2 → 2KI + BaBr2

14. In the refining of Silver, the recovery of silver from Silver nitrate solution involves displacement reaction by Copper metal. Write down the reaction involved.

Ans: Cu(s) + 2AgNO3(aq) → Cu(NO3)2(aq) + 2Ag(s)

15. What do you mean by a precipitation reaction? Explain by giving examples.

Ans: When two solutions containing soluble salts are combined, a double displacement reaction takes place in which the ions are exchanged between the compounds. When one of such compounds formed is in solid form (that is insoluble in aqua), then it settles down at the bottom of the container. This solid is known as the precipitate and the respective reaction is termed precipitation. A few examples of precipitation reactions are

CdSO4(aq) + K2S(aq) → CdS(s) + K2SO4(aq)

2NaOH(aq) + MgCl2(aq) → 2NaCl(aq) + Mg(OH)2(s)

16. Explain the following in terms of the gain of oxygen with two examples each.

(a) Oxidation

Ans: In a chemical reaction, when oxygen is added to the element to form its respective oxide it is the element being oxidised. Example:

4Na(s) + O2(g) → 2Na2O(s)

H2S + O2 → H2O + SO2

(b) Reduction

Ans: In a chemical reaction, when the oxygen is removed from the compound, then it is said to be reduced. Example:

CuO(s) + H2(g) → Cu(s) + H2O(l)

2HgO → 2Hg + O2

17. A shiny brown coloured element ‘X’ on heating in the air becomes black in colour. Name the element ‘X’ and the black-coloured compound formed.

Ans: The shiny brown-coloured element is Copper metal (Cu). When the metal is heated in air, it reacts with atmospheric oxygen to form copper oxide. Hence, the black-coloured compound is copper oxide.

2Cu(s) + O2(g) → 2CuO(s)

18. Why do we apply paint on iron articles?

Ans: Iron articles are painted to prevent them from rusting. When left unpainted, the metal surface comes in contact with the atmospheric oxygen and in the presence of moisture it from Iron(III) oxide. But if painted, the surface does not come in contact with moisture and air, thus preventing Rusting.

19. Oil and Fat containing food items are flushed with Nitrogen. Why?

Ans: The main purpose of flushing Nitrogen into food packets that contain oil and fat items is to prevent Rancidity which occurs when the oil or fat reacts with the oxygen letting out an unpleasant smell and taste. Therefore, by flushing Nitrogen, an unreactive surrounding is created, thus preventing rancidity.

20. Explain the following terms with one example each.

(a) Corrosion

Ans: Corrosion is a process where a refined metal is oxidised by atmospheric oxygen to form a more stable compound, such as oxides. The metal gradually degrades during the corrosion process. Rusting of iron is a good example of corrosion where the iron is converted to Iron oxide. Millions of dollars are spent annually in preventing rusting from bridges and other monuments.

(b) Rancidity

Ans: The condition produced by the aerial oxidation of the oil and fat present in the food material produces an unpleasant taste and smell. The rancidity is retarded when the food is kept inside the refrigerator since the low temperature does not promote the oxidation reaction.

Activities